- Häfele ball bearing guide for 1-3 insert plates
- suitable for frame and slide tables
- Please select the installation length
- Order number: 1006844
- Manufacturer No.: 642.59.912
Häfele ball bearing guide for 1-3 insert plates for synchronous frame and slide tables
Häfele ball bearing guide for 1-3 insert plates for frame and slide tables
- Häfele brand quality
- high-quality ball bearing guide for frame and slide tables
- synchronized with continuous rope locking
- solid and robust extension for 1-3 insert plates
- the practical table extension provides up to 6 additional seats at the table
- Installation: screw under the tabletop
- Material: steel
- Surface: galvanized
- Installation length of the extending table fitting = approx. length of frame/base or approx. 2/3 of table length without insert plates
- Note: guide pins and clamping locks are not included - please order separately
Version: (please select)
- Installation length 850 mm - for 2 to 4 additional seats at the table
- Installation length 1200 mm - for 2 to 6 additional seats at the table
Quantity unit
- 1 set of guides (left and right)
Installation
(1) Support for insert plates |
|
Table with frame |
|
Table with slide |
Technical Data
Installation length |
mm | 850 | 1200 |
Load capacity |
kg | 90 | 90 |
Opening for insert plate |
mm | 1050 | 1590 |
Width of insert plate |
mm | 12 x 500 | 13 x 500 |
Total extension length |
mm | 1900 | 2790 |
Length of mounting angle |
mm | 725 | 725 |
recommended table length | mm | 9001250 | 12501800 |
Frequently asked question on "Häfele ball bearing guide for 1-3 insert plates for synchronous frame and slide tables"
New question for this article ...
New question for this article ...
-
MontageanleitungDownload
Reviews
Reviews
No Reviews yet. Be the first to Review!
Write an evaluation
Evaluations will be activated after verification.
Accessories
(2)
Siso turning bolt BASIC made of brass-plated steel for mortise tables
Stahl
From €1.48
*
In stock
(0)
Siso CATCHER steel tension lock with locking mechanism for frame tables
Stahl
From €2.90
*
In stock
Similar products
(2)
Siso turning bolt BASIC made of brass-plated steel for mortise tables
Stahl
From €1.48
*
In stock
(0)
Siso CATCHER steel tension lock with locking mechanism for frame tables
Stahl
From €2.90
*
In stock
Customers also bought
(2)
Siso turning bolt BASIC made of brass-plated steel for mortise tables
Stahl
From €1.48
*
In stock
(0)
Siso CATCHER steel tension lock with locking mechanism for frame tables
Stahl
From €2.90
*
In stock
(0)
Häfele ball bearing guide for 1 insert plate, asynchronous, for slide-in tables, installation length 520 mm
Stahl
€104.90
*
In stock
(0)
Häfele Ball Bearing Guide for 1 Insert Plate Asynchronous or Synchronous for Frame Tables
Stahl
From €41.90
*
In stock