Hafele opening restrictor H3950 made of steel, 150 mm
- Häfele opening limiter 150 mm
- for screw mounting
- please select direction
- Order number: 1005706
- Manufacturer No.: 371.32.755
Hafele opening restrictor H3950 made of steel, 150 mm
Häfele opening limiter H3950 made of steel
- Häfele brand quality
- Limiter for cabinets and flaps
- Easy and quick installation - screw-on
- Reliably prevents unwanted impact of furniture doors, flaps, etc.
- Length: 150 mm
- Installation: screw-on
- Application: for all furniture doors, cabinets, boxes, motorhome area, and furniture flaps
- Material: steel
- Surface: nickel-plated
Configuration: (please select above)
- Left
- Right
Unit of measure
- Per 1 piece
Drilling pattern
 |
|
Door |
 |
|
Top panel |
Installation
 |
 |
Frequently asked question on "Hafele opening restrictor H3950 made of steel, 150 mm"
New question for this article ...
New question for this article ...
Similar products
Häfele folding hinge H3961 Ø 35 mm 90° 3D adjustable for wooden flaps, nickel-plated
Zinkdruckguss
From €8.55
*
In stock
Häfele Brake Flap Holder H3913 Flap Fitting 90° with Braking Effect Nickel Plated
Stahl
€27.50
*
In stock
Häfele Folding Hinge H3960 90° 3D Adjustable for Wood Flaps from 18 mm Nickel Plated
Zinkdruckguss
From €9.73
*
In stock
Häfele Brake Flap Holder H3915 Single-arm Support with Clamp Block and Screwing Plate
Stahl
€4.01
*
In stock
Gedotec Furniture Handle COBRA made of Steel Ø 12 mm, hole spacing 128 - 320 mm
Stahl
From €2.47
*
In stock
Gedotec Brake Flap Holder KRABY Lifting Support 85-100° Maximum Flap Width 1200 mm
Stahl
From €32.50
*
In stock
Häfele Brake Flap Holder H3918 for wooden flaps with opening limitation and automatic closing
Stahl
€46.90
*
In stock
Customers also bought
Gedotec furniture handle ELHAN made of stainless steel Ø 12 mm, LA 96 - 480 mm
Edelstahl
From €2.58
*
In stock
Häfele Folding Hinge H3963 for Wooden Flaps with Screw Fastening Opening Angle 270°
Stahl
From €4.01
*
In stock
Häfele Folding Hinge H3960 90° 3D Adjustable for Wood Flaps from 18 mm Nickel Plated
Zinkdruckguss
From €9.73
*
In stock
Häfele Brake Flap Holder H3913 Flap Fitting 90° with Braking Effect Nickel Plated
Stahl
€27.50
*
In stock
Häfele Magnetic Catch H6012 Holding Power 4 kg for Screw Mounting, Square Shape
Stahl
From €6.27
*
In stock
Häfele folding hinge Plano Medial Ø 30 mm for wooden flaps, die-cast zinc
Zinkdruckguss
From €4.44
*
In stock
Siso Magnet Snap MAG-SLIM made of plastic, adjustable ejection path
Kunststoff
From €1.81
*
In stock
Emuca Steel Drawer Slide Full Extension 30 kg Side Mount with Soft Close and Push to Open
From €11.85
*
In stock
Häfele expansion sleeve with internal thread M6 brass for hole diameter Ø 8 mm
Messing
From €0.43
*
In stock
Häfele surface mounted hinge for ungrooved internal doors up to 120 kg, stainless steel, matt, angular
Edelstahl
From €12.90
*
In stock
Häfele Hinge Metalla Mini A 95° Pot Hinge for Small Doors and Narrow Frames
Stahl
From €1.10
*
In stock
Häfele Push-to-Open Pressure Catch with Rubber Buffer for Drilling, Ø 10 mm
Kunststoff
€4.87
*
In stock
geht so
Ich habe nicht richtig gelesen,So wird man Kanzler.Zu den Öffnungsbegrenzer,ohne Schrauben,2 rechts 2 links,nutzt nichts,denn an meinemSchrank gehen alle Türen zur einer Seite auf,konnte so nur 2 Einbauen.Begrenzung Funktioniert so gut,das Soft&Close nicht mehr Funktioniert.Also für mich Nutzlos,Material gut,Lieferung schnell,werde sie behalten,Auswahl ob rechts,links anschlag,so wie kleine Schrauben dabei wäre Vorteilhaft.
Gutes Produkt mit nicht eindeutiger Montageanweisung
Eine Angabe der Montagemaße wäre super gewesenIch habe die Durchführung im Schrank nun auf ca 100mm (Mitte) aus der Ecke montiert und es passtAlles in Allem ein sehr gutes Produkt