- made of hardened HSS 4241 high speed steel;
- a special titanium nitride coating increases durability and quadruples the service life;
- precision, with high drilling speed;
- the uncoiled and thicker core provides resistance against breakage during use;
- Order number: 1027422
- Manufacturer No.: HT6D321
Högert Step Drill Bit D 4 - 39 mm
Step drill bit Ø 4 - 39 mm
The step drill bit is suitable for drilling in various types of steel, non-ferrous metals, copper, brass and aluminum, stainless steel, plastics, and wood. It allows for drilling precise holes and can be used in sheet metal and locksmith workshops, car repair workshops, or by plumbers and electricians. Designed for professional use.
- made of hardened HSS 4241 high-speed steel;
- special titanium nitride coating increases durability and quadruples the lifespan;
- precision with high drilling speed;
- the untwisted and thicker core provides resistance against cracking during use;
- diameter: HT6D321 - 4-12 mm HT6D322 - 4-20 mm HT6D323 - 4-32 mm HT6D324 - 4-39 mm;
- two straight cutting edges enable twice as fast and smoother cutting through efficient chip and heat dissipation;
- reduce the risk of overheating;
- number of steps: HT6D321 - 5 (4, 6, 8, 10, 12 mm) HT6D322 - 9 (4, 6, 8, 10, 12, 14, 16, 18, 20 mm) HT6D323 - 15 (4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32 mm) HT6D324 - 13 (4, 6, 9, 12, 15, 18, 21, 24, 27, 30, 33, 36, 39 mm);
- 1/4 HEX drive for quick and secure assembly on drills, screwdrivers, or adapters, HT6D324 drill with triangular drive - prevents bit slipping and rotating in the chuck;
- 118° cutting angle and conical shape of the drill - pre-drilling or scoring is not required;
- auto-deburring - automatically chamfers and smoothens the edges during drilling, eliminating the need for manual hole processing;
- designed according to DIN 1412C;
- the maximum material thickness is 4 mm;
- markings on the surface of the drill bit allow you to monitor the correct diameter of the hole.
Frequently asked question on "Högert Step Drill Bit D 4 - 39 mm"
New question for this article ...
New question for this article ...
Reviews
Reviews
No Reviews yet. Be the first to Review!
Write an evaluation
Evaluations will be activated after verification.
Customers also bought
(0)
Högert Flat Wood Drill Bit with Center Point and Hexagonal Shaft, D 10 - 40 mm
From €1.63
*
In stock
%
(35)
Häfele Descending Seal DDS 12 made of Aluminum, MADE IN GERMANY
Aluminium
From €25.00
*
€27.50
In stock
(0)
Häfele Back Wall Screw Hospa Ø 35 mm Phillips Pozidriv Full Thread Zinc Plated Flat Head Various
From €0.06
*
In stock
(0)
Häfele expansion sleeve with internal thread M6 brass for hole diameter Ø 8 mm
Messing
From €0.43
*
In stock
(0)
Blum Pot Hinge Module 95° for Refrigerator Door Applications 91K9550
Stahl
From €1.21
*
In stock
(0)
Häfele Rear Panel Screw Hospa Ø 40 mm Phillips PZ Crosshead Fully Threaded Galvanized Flat Head Various
From €0.06
*
In stock
%
(4)
Häfele Magnetic Catch H6006 Holding Force 3-4 or 4-5 kg for Screw Mounting, Square
Kunststoff
From €0.74
*
In stock
(12)
Simonswerk Mortise Hinge Wing Part V 0020 for Interior Doors Ø 15 mm
Stahl
From €0.82
*
In stock
(29)
Häfele Corner Bench Hinge H3905 Lid Support for Wooden Seat Plates with Zinc-Plated Spring Steel
Stahl
From €22.90
*
In stock